| 保温水箱的注意事项 |
| 添加时间：2019/8/31 9:34:03 浏览次数： |
| 1、保温水箱可安装在平屋顶、地面或家用系列还可以安装于室外的阳台、室内的厨房、卫生间等位置。 1. Insulating water tank can be installed on flat roof, ground or household series. It can also be installed on outdoor balcony, indoor kitchen and toilet. 2、保温水箱安装位置应方便排污口排水，热水箱应尽量靠近用水点及主机安装的位置，以减少管路热损失。 2. Installation location of thermal insulation water tank should be convenient for drainage of sewage outlet, and hot water tank should be as close as possible to water point and main engine installation location to reduce heat loss of pipeline. 3、楼面工程，水箱无论大小都要放置承重梁上；水箱超过5吨要求客户做承重基础，承重基础承重能力应大于水箱盛水后重量的两倍；楼面比较宽或水箱比较大时建议客户把水箱分为多个放置于承重梁上（正常情况，单个圆形水箱不要超过10吨，单个方形水箱不要超过20吨）。 3. Floor engineering, water tanks, regardless of size, should be placed on load-bearing beams; water tanks over 5 tons require customers to do load-bearing foundation, load-bearing capacity of the foundation should be greater than twice the weight of the water tank after filling water; when the floor is relatively wide or the water tank is relatively large, it is recommended that customers divide the water tanks into multiple places on load-bearing beams (normally, a single round water tank). The tank should not exceed 10 tons and the single square tank should not exceed 20 tons. 4、保温水箱楼顶放置，应放置不锈钢镜面反光，影响周围办公或生活环境。 4. Stainless steel mirror reflections should be placed on the roof of thermal insulation water tank to affect the surrounding office or living environment. 5、保温水箱落地安装，必须做150mm高度以上的安装水平地基，水箱放置位置应不影响周围居民。 5. Installation of heat preservation water tank on the ground must be done on horizontal foundation above 150 mm height. The location of water tank should not affect the surrounding residents. 6、保温水箱放置的基础需要水平面，且基础平面不能出现积水现象； 6. The foundation of the thermal insulation water tank needs horizontal plane, and the water accumulation phenomenon can not appear in the foundation plane. |
| 上一页 不锈钢保温水箱优点和原理 |
| 下一页 保温水箱制作原理 |
Copyright © 技术支持：遨游网络