保定市保温水箱厂

不锈钢保温水箱清洗的步骤：

The cleaning steps of the stainless steel insulation water tank:

1.关闭进水阀门，打开排污孔堵头(或阀门)，使用水箱中的余水排尽；

1. close the inlet valve, open the drain hole plug (or valve), drained using the residual water in the water tank;

2.带有爬梯的水箱可沿爬梯爬入水箱内，不带爬梯的水箱则可用竹梯2个(高度适中)，分别架于水箱内外侧，在有人保护的情况下就可以爬入水箱；

2., the water tank with ladder can be crawled into the water tank along the ladder. The water tank without ladder can be used for 2 (moderately high) bamboo stacks, which are respectively mounted on the inside and outside sides of the water tank, and can be climbed into the water tank when people are protected.

3.用干净拖把或抹布对水箱周围和底部进行抹擦，底部积垢严重的，可用软毛巾加去污粉擦洗；

3. with a clean mop or cloth to clean the bottom and around the water tank, the bottom of the serious fouling, use a soft towel with detergent scrub;

4.打开进水阀门，放入适量清洗洗桶壁及底部，使污垢从排污口排污，必要时可反复进行多次，直至满意为止；

4. open the water valve, put a proper amount of cleaning the wall and the bottom of the washing bucket, so that the dirt can be discharged from the sewage outlet. It can be repeated many times when necessary until it is satisfied.

5.旋紧排污堵头，打开进水阀门，让水箱重新装水，清洗工作结束。

5. tighten the drain plug, open the water valve, let the water tank reload, cleaning the end of the work.